When you think of smart homes, is security something that comes to mind? The motion sensor, security camera, remote thermostat, and more. When you have a tilt sensor, for example, you can lock your driveway or fence away from home at any time, regardless of where you are. What are the mechanisms by which they function? How can these mechanisms benefit you? More information about the technology that Vivint offers can be found in this article.
How does a Vivint tilt sensor work?
In accordance with their name, tilt sensors detect different angles and inclinations. In addition to being smaller, more affordable, easier to use, and with proper usage, sensors like these won't wear out over time. Similar to mercury switches, tilt switches can also be called motion switches.
The components are often cylindrical in shape with conductors inside to facilitate the transmission of electricity. An item lines up straight through a cavity that contains conductors that allow electricity to flow along the sensor. If the conductor leaves the chamber during tilting, an electrical signal is cut.
A detector that goes beyond
The tilt sensor of a garage door determines whether the door is open or closed. If your smart home network is connected, you will be able to control your doors and receive alerts about open doors by using your smartphone or mobile device.
In addition to providing a variety of notable benefits, Vivint tilt sensors are also useful. The convenience of smart home conveniences makes it much easier to close or open doors without leaving your vehicle. Using smartphone apps and smart control panels, you can control tilt sensors remotely and easily.
Organize alarms and monitor them
The use of a tilt sensor in your home could be used to monitor your garage, hatches, roll-up doors, and virtually anything else that tilts in the interior of your house. Based on your settings, you can receive alerts on the level and flatness of the sensors when armed. Alarms are triggered when monitored items change positions. Rather than just focusing on small home automation components, a comprehensive ecosystem is key to smart home technology.
When your kids arrive home from school, smart door locks let them access the door remotely, or you can provide a one-time code so guests can enter when you are hosting a party. Additionally, doorbell cameras work well with door tilt sensors because they allow homeowners to communicate with visitors while away from home and see who is at the door.
The Vivint Tilt Sensor needs to be recharged
Overhead garage doors are monitored by Vivint Door Sensors. Your garage door controller may come with a tilt sensor as well, or you may have a tilt sensor on its own. Put your system in Test Mode when changing the battery to prevent false alarms or tamper alerts. Using a flathead screwdriver, turn the screwdriver 90 degrees to remove the sensor from the back plate.
To view the battery, first remove the sensor from the back plate, place a screwdriver in the slot between the metal clip and the battery, and then lever the battery while holding back a black plastic ridge securing it.
Ensure the plus (+) sign is facing up when inserting the replacement battery.
The sensor should be replaced on the back plate, and the arrow on the side of the sensor should point upward as the tamper button is aligned with the tamper tab. Then exit Test Mode on your panel to ensure the sensor is reporting correctly.
Vivint Tilt Sensor - Installation Guide
An easy task
- A typical timeframe is 10-15 minutes
- The work must be done at home
The following are required:
- Step Stools and ladders
- Screwdriver with a Phillip's head
- An adjustable speed drill with a 1/16" drill bit is used
- 1 new Tilt Sensor
The location of your Vivint Garage Door Sensor should be chosen carefully.
Consider:
- Sectional garage doors should have the sensor installed near the top of the top panel. When the door is closed, mount the sensor, so it sits in a vertical position if it is on a different type of tilting entry.
- In the event that the sensor is exposed to moisture or temperatures beyond its operating range and where there is a large quantity of metal or electrical wiring, it may not be able to communicate with the control panel. It should not be installed in areas exposed to moisture or outside its operating range.
Get your sensor out of the box
Separate the mounting plate from the sensor by opening it. Take off the pull strip that protects the battery.
The battery tab needs to be removed
Remove the plastic pull strip that protects the battery.
Identify the location of the mounting plate
Mark the location of the sensor using the back plate as a template. In case you are using adhesive, outline the back plate if you are drilling the holes. Tamper tabs should be oriented downward.
The mounting plate needs to be attached
A screw or adhesive strip can be used to mount the Tilt Sensor. The sensor comes with both. Upward should be the direction of the arrow.
Make sure your sensor is attached
Secure the sensor with the arrow pointing upwards when snapping it onto the mounting plate. The Vivint Garage Door Sensor can be integrated into your panel so that it can work with it
Sensors should be tested
Check that the sensor is communicating properly with your panel by raising and lowering your garage door.
Conclusion
Using a Vivint Tilt Sensor, you can remotely monitor a tilting surface, such as a garage door, shed, hatch, or roll-up door. With this sensor-equipped garage door, you will be notified whenever a door opens, improving the security of your garage and shed. A home automation system can be integrated seamlessly into this overhead door alarm.
